1.1.23910-1240 Injector’s Basic Information

1.2.23910-1240 Injector’s Common Part Number

（1）Injector’s Exchange Information

（2）Injector’s Application Information

（3）Injector’s Part Number Common Writing

095000-5220,095000-5221,095000-5222,095000-5223,095000-5224,095000-5225,095000-5226,095000-5227,095000-5228，095000-5229，095000-522#，0950005220，0950005221，0950005222，0950005223，0950005224，0950005225，0950005226，0950005227，0950005228，0950005229，095000522#，23910-1240，23670-E0340，23670-E0341

1.3.23910-1240 Injector’s Matching Information

1.4.23910-1240 Injector’s Parameter

Adaptation System：Common Rail System

Injector Series：G2 Series

Injector Type：Electromagnetic Injector

Applicable For Vehicle: HINO

1.5.23910-1240 Injector’s Specifications and Dimensions

Injector Size:  22cm*8 cm *4 cm = 704cm³ (L*W*H=V)

Injector Net Weight: 0.8kg

Gross Weight: 0.9kg

Injector Quality: China Made Brand New Injector

Package Size： 24cm*12 cm *6 cm = 1728 cm³

Injector Type：Diesel Common Rail Injector

MOQ：4 Pieces

1.6.23910-1240 Injector’s Quality Control

（1）Injector Testing

All injector spare parts are tested for electrical characteristics, accuracy, high temperature, low temperature, withstand voltage, leakage, durability, and various working conditions.

（2）Injector Assembling

And the quality control of the injector production and installation process, our company strictly follows the standard product installation data and product installation steps to install, such as injector stroke test, injector solenoid valve tightening torque, injector nozzle tightening torque,

（3）Injector Inspection

The factory inspection of the injector is undergone full inspection, random inspection, and batch inspection three inspections. Different brands of test benches are used to test the same fuel injector for a total of no less than three times for factory inspection, and the fuel injector installation and test environment are progressed in dust-free workshop.

1.7.23910-1240 Injector’s Warranty Instructions

（1）. Product Warranty Conditions and Instructions

It is necessary to provide pictures, videos, or test reports detected by the injector inspection equipment when the injector is abnormal during use as evidence to feed back to the salesman.

Abnormal conditions are properly explained such as：1.Smoke, 2. Engine shake, 3. Difficulty starting the engine, 4. Engine noise, 5. oil leakage etc.

（2）. Injector Warranty Coverage

Within 15 days after customer receives the 23910-1240 injector, if there is a performance failure and the product has no appearance damage, customer can choose to replace it or repair it;

If the 23910-1240 injector has performance problems during the warranty period (3 months), and it is confirmed that it is product’s problems after testing, you can contact our salesmen to replace the same model or a reworked product with the same performance for free;

If the injector house has obvious scratches, it can only be repaired and it will be returned as it is if the product is confirmed to be fault-free.

• Tips：For products not covered by warranty, our company can provide paid maintenance services. For products after paid repaired, the same performance problem will have a free warranty period within 3 months from the date of repairing.

（3）. Injector Out of Warranty Coverage

• The warranty period has expired.
• Injector failure caused by high temperature, high pressure, humidity, rain and snow, saline-alkali land, earthquake, and used in abnormal environment.
• Customer disassembles or repairs the injector personally resulting in damage to the injector.
• Injector damage caused by man-made reasons (throwing, strong magnetic field magnetization, set fire).
• Injector failure or injector damage caused by non-injector design, technology, manufacturing, quality and other issues.
• Injector failure due to system pressure exceeding system approved pressure.
• Injector failure caused by system voltage exceeding approved voltage.
• Injector failure caused by impurities (water, lead, aluminum powder, iron powder, sulfide) in the system fuel exceeding the standard requirements.
• Injector failure caused by not installing according to the tightening torque specified in the vehicle engine maintenance manual (the tightening torque is too large or too small).
• Injector failure caused by not following the installation angle specified in the vehicle engine maintenance manual.
• Injector failure caused by not following the cleaning requirements specified in the vehicle engine maintenance manual.
• Injector failure caused by failure to replace consumable parts as specified in the vehicle engine maintenance manual.
• Injector failure caused by not complying with the intake system fit clearance and exhaust system fit clearance requirements specified in the vehicle engine maintenance manual.
• Failure to replace the consumable parts and the fitting clearance of the oil inlet system pipeline and the fuel injector connection in accordance with the fuel intake system specified in the vehicle engine maintenance manual.

1.8.23910-1240 Injector’s Storage Standard

（1）Choose a suitable storage place

The warehouse and cargo yard where the fuel injector is stored should be kept clean and dry, and away from the factory buildings that generate harmful gases and dust; do not mix with acid, alkali, salt and other substances; the storage place should have a good drainage system; the cargo yard should be flattened with gravel or furnace ash etc. to enhance the water permeability of the surface layer to keep the reservoir area dry.

（2）Strict requirements of warehousing

Strict inspections should be carried out when the fuel injectors are put into storage, the surface cleaning work should be done well to remove water traces, oil stains, ash and other dirt, remove the rust and do anti-rust treatment in time. Packaged injectors must be protected from damage.

（3）Keep the warehouse dry and preventing moisture

The relative humidity is usually below 70% for the fuel injectors placed in the room, and the corrosion of the fuel injectors is significantly reduced.

Injectors must be stored in the warehouse, and they are forbidden to store in the same warehouse with commodities with high water content.

（4）Stack Properly

• After the injector is exposed to rain, the corrosion rate will increase significantly. The purpose of sealing is to isolate the injector from rainwater and humid air, so the warehouse window should be checked in time to avoid rainwater entering the warehouse

If the fuel injector package is damaged, it should be repaired or replaced; when the package is damp, the packaging material should be dried; if the original anti-corrosion and oil applied at the factory is found to be damaged or dried up, it should be cleaned and re-applied oil in time.

• It is forbidden to leave the injector exposed in the air for a long time.
• It is forbidden to store acid, alkali, salt and other substances together with the injector.
• The unpacked fuel injector must be rust-proof during secondary storage.

1.9. 23910-1240 Injector’s  Shipping Ways

Domestic express packaging：Usually wrapped in waterproof scotch tape, such as picture No.1

International express packaging：Wrapped with waterproof yellow tape After wrapping the black protective film, such as picture No. 2

Pallet Shipping：Use fumigation free and recycling trays that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties for the outside, such as picture No. 3,

also, the products can be packaged according to customers’ requirements.

The packing tray is made of plastic and can be recycled.

Transparent tape, yellow tape, black wrapping protective film, white wrapping protective film are non-degradable materials, please dispose of them properly.

Minors are prohibited from using transparent tape, yellow tape, black wrapping protective film, and white wrapping protective film to avoid personal injury.

Pic.No.1 Domestic express packaging：Wrapped with Transparent tape	Pic.No.2 International express packaging：Wrapped with yellow tape after wrapping black protective film
Pic.No.3 Pallet Shipping：Use pallet that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties